Red Thread HP 16,25

Size Range: 2″-24″ Inner Corrosion Barrier: Resin Rich Pressure Ratings: 225-450 psig Construction: Filament wound with amine cured epoxy resins and fiberglass roving Temperature Range: Up to 210°F / 100°C Fittings: T.A.B.® (Threaded and Bonded) or Bell and Spigot Chemical Service: Saltwater, CO2, crude oil, natural gas, light chemical: salts, solvents and pH 2-13 solutions

There are many advantages to choosing Red Thread II pipe. For example, when considering total installed cost, Red Thread II piping provides significant savings due to its light weight and easy installation features. No heavy handling equipment is required, and the load the pipe adds to a structure is minimal compared to steel, black iron, copper, and stainless steel. For example, 4” pipe weighs only 1.2 lbs. per foot compared to 5.6 lbs. for Schedule 10 stainless.

Red Thread II pipe is a filament wound product using epoxy resins and continuous glass filaments with a resin rich interior surface. Its major advantages are long service life, light weight and corrosion resistance. Pipe and fittings are available in 2” through 24” diameters with pressure ratings up to 450 psig static at a maximum operating temperature of 210ºF. Diameters up to 36” are available upon request. Compatible epoxy fittings are manufactured with the same chemical/temperature capabilities as the pipe. Depending on the particular part and size, fittings will be compression molded, contact molded, hand fabricated or filament wound.